Halloween & Spooky Cute100% Original Design

Haunted Iron Lantern — 1:1 Fuse Bead Pattern

Vintage wrought-iron street lantern housing a warm flickering cheddar-and-yellow candle flame. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 259 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads259 pcs6 solid colors
Est. Craft Time~12 minIntermediate

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P18Black#1E20231001 bag1 bag
P52Pastel Blue#71AEDF901 bag1 bag
P110Charcoal#373B40381 bag1 bag
P57Cheddar#F6AE2D201 bag1 bag
P03Yellow#F7D117101 bag1 bag
P01White#F7F8F911 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Haunted Iron Lantern

1:1 Under-Board Alignment Tip

Built-in top ring at row 3 lets you hang this lantern directly on window suction hooks. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Halloween & Spooky Cute Patterns

View all Halloween patterns →