Halloween & Spooky Cute100% Original Design

Monster Swirl Cupcake — 1:1 Fuse Bead Pattern

Lavender-frosted Halloween bakery cupcake with orange liner stripes, green sprinkles, and candy eye topper. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 237 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads237 pcs6 solid colors
Est. Craft Time~11 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P18Black#1E2023851 bag1 bag
P54Pastel Lavender#9B89C4771 bag1 bag
P04Orange#F46A25501 bag1 bag
P57Cheddar#F6AE2D181 bag1 bag
P01White#F7F8F951 bag1 bag
P49Neon Green#4EE04D21 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Monster Swirl Cupcake

1:1 Under-Board Alignment Tip

Great match for Pastel Lavender (P54) and Neon Green (P49) leftovers from Perler 22,000 storage buckets. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Halloween & Spooky Cute Patterns

View all Halloween patterns →