Pre-Locked Hama H01–H108 · A4 1:1 Calibration · Starter Box Filter

Hama Bead Pattern Maker for Midi (5.0mm) & Mini Boards

Pre-configured for European Hama Midi (H01–H108) and Hama Mini (2.60mm) palettes, exporting exact 145.00×145.00 mm A4 vector sheets that align straight under clear Hama #234 interlocking pegboards.

Active Preset: Hama Midi (5.0mm) · 29×29 (145.0×145.0 mm)100% Browser-Local (<150 ms) · Zero Image Upload
29×29 pegs·194 beads·3 solid colors·~9 min

4-Step European Hama Pegboard & A4 Print Workflow

Step 1

Import Artwork or Pick a Hama-Ready Template

Drop a JPG/PNG/WebP image or choose a starter sprite with the palette pre-locked to Hama Midi 5.00mm (H01–H108) or Hama Mini 2.60mm.

Step 2

Filter by Solid Hama Shades or 24-Color Starter Box

Keep Solid Opaque Lock enabled to exclude translucent codes (H13–H16, H19, H24) and optionally constrain to the 24-color Hama Midi Starter Box.

Step 3

Export True 1:1 A4 Vector PDF & Check the 50.0mm Ruler

Download the A4 (210×297 mm) PDF, print at 100% Actual Size, and confirm the 50.0mm ruler equals exactly 10 Hama Midi pegs before sliding beneath clear board #234.

Step 4

Iron Gently at Hama’s Lower Soft-Melt Temperature

Enable Mirror Horizontally if flat-melting text, and fuse Hama beads on medium-low dry heat without mixing higher-melt Perler or hard IKEA Pyssla beads.

Purpose-Built for European Hama Numbering & Clear #234 Pegboards

Crafters across the UK, Denmark, Germany, France, and Spain searching for an online hama bead pattern maker routinely run into North American defaults that output Perler codes or Asian 52×52 grids that do not fit European pegboards. Manufactured in Denmark since 1971, Hama Midi beads measure 5.00mm in outer diameter and seat onto the iconic interlocking 29×29 square pegboard (Hama #234 clear or #220 white), producing an exact 145.00×145.00 mm physical grid.

This dedicated hama bead pattern maker initializes directly on active Hama Midi (H01 White through H108 Midnight Blue) and defaults PDF output to ISO A4 paper (210.0×297.0 mm). Because 145.00 mm leaves generous 32.5 mm left/right margins on an A4 sheet, an entire 29×29 Hama board plus dual 50.0mm calibration rulers and a 1,000-bead bag shopping list prints cleanly on a single page with zero scissor taping.

Hama Fuse Bead Series & Pegboard Geometry Supported in FuseBeadCraft
Hama SeriesBead DiameterStandard PegboardExact 1:1 Grid SizeRecommended Age & Use
Hama Midi (H01–H108)5.00 mm29×29 Square (#234 Clear)145.00 × 145.00 mmAge 5+ · Coasters, ornaments, portraits
Hama Midi Multi-Board5.00 mm2×2 to 8×8 Interlocked #234290.00 mm up to 1,160.00 mmWall art, pixel murals, door signs
Hama Mini (HM Series)2.60 mm28×28 / 50×50 Mini Square72.80 × 72.80 mm / 130.00 mmAge 10+ · Earrings, brooches, fine art

Hama Midi Color Architecture: Pastels, Neons & Solid Opaque Lock

Hama’s catalog evolved chronologically rather than by hue group: primary shades occupy H01–H12, early translucent colors sit right in the middle at H13–H16 and H24, fluorescent neons span H32–H38, classic pastels cover H43–H48, glow-in-the-dark shades occupy H55–H57, and modern muted botanicals (H95 Rose, H98 Mint, H99 Eucalyptus, H103 Sand) sit near H100+. If an uncalibrated converter treats translucent H13 Transparent Red or H35 Neon Red as regular opaque shades, skin and shadow areas fuse into glossy, uneven plastic windows.

Our hama bead pattern maker activates Solid Opaque Lock automatically so photo conversion only selects true opaque Hama polyethylene shades while keeping translucent, glow, and metallic (H61–H63) codes available for manual accent painting in Studio. If you own the popular 24-color Hama Midi Starter Tray, you can also toggle the Hama Starter filter to remap missing nuances like H99 Eucalyptus or H75 Nougat to their closest in-box CIEDE2000 equivalents.

Thermal Warning: Why You Should Not Mix Hama & Perler on One Ironing Pass

Hama Midi beads soften and fuse at roughly 10–15°C lower iron temperatures than North American Perler Midi or Artkal S hard beads. Mixing Hama and Perler on the same pegboard causes Hama beads to over-flatten and smear before adjacent Perler beads bond.

Converting US Perler Charts Into European Hama Codes

Found a pattern online written only in Perler numbers? Use our instant Brand Switcher or dedicated Bead Color Converter to map every Perler shade into Hama H-codes with transparent ΔE00 color-distance scores.

Printing & Ironing Best Practices for Clear Hama Pegboards

Unlike opaque white Hama #220 pegboards that force you to count rows beside the tray, transparent Hama #234 interlocking boards let you tape a 1:1 A4 printout straight underneath the acrylic base so every color code shines directly beneath its target pin. In your browser or system PDF print dialog on Windows, macOS, or Linux, switch scaling from "Fit to Printable Area" to 100% / Actual Size, then lay a metric ruler over the printed 50.0 mm bar—ten Hama pegs must span exactly 50.0 mm (±0.2 mm).

When using an online hama bead pattern maker for keychains, coasters, or gift plaques containing names, remember that Hama’s silicone-coated ironing paper creates a smooth, glossy finish on whichever side touches the iron. If you lift beads off your #234 board with painter’s tape to protect the pins from heat warping and flat-melt the reverse side, toggle Mirror Horizontally for Flat-Melt Ironing prior to printing so directional details flip right-side up when finished.

  • Supports Hama Midi (5.00mm) and Hama Mini (2.60mm) with accurate 500-bead and 1,000-bead refill bag calculations.
  • Free Auto De-Confetti removes stray 1–2 bead facial noise without requiring paid subscriptions.
  • Mobile Tabletop Mode keeps your phone screen awake (Screen Wake Lock) with single-color H-code spotlighting.
  • 100% private local image conversion—family photos stay inside your browser tab.

Related Pegboard Tools, Color Charts & Guides

Frequently Asked Questions

Does this Hama bead pattern maker print at exact 1:1 scale for Hama #234 clear pegboards?

Yes, standard 29×29 Hama Midi grids export as native 145.00×145.00 mm vector PDFs on A4 paper, aligning pin-for-pin beneath transparent Hama #234 square pegboards when printed at 100% Actual Size.

Are Hama Maxi (10mm) toddler patterns compatible with 29×29 Midi grids?

Small Easy Beginner sprites under 14×14 beads can be adapted manually to Hama Maxi boards, whereas this studio calibrates 1:1 PDFs specifically for 5.00mm Hama Midi and 2.60mm Hama Mini pitch.

Why does Hama H26 Flesh sometimes look too pink on indoor portraits?

Warm tungsten room lighting shifts camera white balance toward orange-pink; pairing H26 Flesh with H27 Beige, H103 Sand, and H75 Nougat under CIEDE2000 produces balanced European portrait shading.

Can I fuse Hama Midi beads and IKEA Pyssla beads together on one board?

No, Hama Midi melts noticeably softer and earlier than stiffer IKEA Pyssla polyethylene, causing Hama zones to over-melt while Pyssla rims remain tall and poorly bonded.

How many Hama Midi beads come in standard European retail bags?

Standard single-color Hama Midi refill bags contain 1,000 beads (with larger 3,000-bead and 6,000-bead studio packs for black and white), which our shopping table calculates automatically.

Is Hama Mini (2.6mm) supported separately from 5.0mm Hama Midi?

Yes, switch the Target Brand dropdown to Hama Mini (2.6mm) to unlock 28×28 (72.80×72.80 mm) and 50×50 (130.00×130.00 mm) mini pegboard dimensions.