Halloween & Spooky Cute100% Original Design

Lantern Friendly Ghost — 1:1 Fuse Bead Pattern

Smiling sheet ghost floating with rosy pastel cheeks and a tiny golden pumpkin trick-or-treat bucket. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 270 total beads across 5 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads270 pcs5 solid colors
Est. Craft Time~12 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P01White#F7F8F91741 bag1 bag
P18Black#1E2023771 bag1 bag
P04Orange#F46A2591 bag1 bag
P52Pastel Blue#71AEDF81 bag1 bag
P63Blush#F39CB221 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Lantern Friendly Ghost

1:1 Under-Board Alignment Tip

Swap White (P01) for Glow Green (P75) in Studio if you want this ghost suncatcher to glow on bedroom walls at night. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Contains asymmetrical or readable details: enable Mirror Horizontally before exporting your 1:1 PDF if you flat-melt the back using the masking-tape method. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Halloween & Spooky Cute Patterns

View all Halloween patterns →