Halloween & Spooky Cute100% Original Design

Smiling Candy Corn Charm — 1:1 Fuse Bead Pattern

Kawaii tri-band white, orange, and yellow candy corn treat with rosy cheeks—ideal for 10-minute kid crafts. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 200 total beads across 5 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads200 pcs5 solid colors
Est. Craft Time~9 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P03Yellow#F7D117731 bag1 bag
P18Black#1E2023581 bag1 bag
P04Orange#F46A25541 bag1 bag
P01White#F7F8F9131 bag1 bag
P63Blush#F39CB221 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Smiling Candy Corn Charm

1:1 Under-Board Alignment Tip

Uses only 5 starter-jar shades (P18, P01, P04, P03, P63) and completes in under 10 minutes. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Halloween & Spooky Cute Patterns

View all Halloween patterns →