Halloween & Spooky Cute100% Original Design

Twilight Scalloped Bat — 1:1 Fuse Bead Pattern

Outstretched purple-and-charcoal Halloween bat with tiny white fangs and symmetric scalloped wings. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 191 total beads across 5 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads191 pcs5 solid colors
Est. Craft Time~9 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P18Black#1E2023941 bag1 bag
P110Charcoal#373B40751 bag1 bag
P07Purple#63428F181 bag1 bag
P01White#F7F8F921 bag1 bag
P38Magenta#D82E6F21 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Twilight Scalloped Bat

1:1 Under-Board Alignment Tip

Leave symmetric holes near wingtips (5, 11) and (23, 11) to hang a row of bats along a fireplace garland. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Halloween & Spooky Cute Patterns

View all Halloween patterns →