Halloween & Spooky Cute100% Original Design

Spiderweb Party Coaster — 1:1 Fuse Bead Pattern

Octagonal midnight-purple and white spiderweb mug coaster accented with a tiny smiling corner spider. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 405 total beads across 4 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads405 pcs4 solid colors
Est. Craft Time~18 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P07Purple#63428F2081 bag1 bag
P01White#F7F8F91201 bag1 bag
P18Black#1E2023751 bag1 bag
P49Neon Green#4EE04D21 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Spiderweb Party Coaster

1:1 Under-Board Alignment Tip

Flat-melt completely so chilled October cider glasses rest evenly across the radial white web spokes. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Halloween & Spooky Cute Patterns

View all Halloween patterns →