Halloween & Spooky Cute100% Original Design

Grinning Jack-O-Lantern — 1:1 Fuse Bead Pattern

Classic ribbed pumpkin lantern with glowing yellow triangle eyes, jagged grin, and curled vine stem. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 278 total beads across 5 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads278 pcs5 solid colors
Est. Craft Time~13 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P04Orange#F46A251601 bag1 bag
P18Black#1E2023571 bag1 bag
P03Yellow#F7D117331 bag1 bag
P20Rust#943F28241 bag1 bag
P10Dark Green#146B4341 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Grinning Jack-O-Lantern

1:1 Under-Board Alignment Tip

Shade the outer pumpkin ribs in Rust (P20) around bright Orange (P04) so the carved Yellow (P03) grin pops. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Halloween & Spooky Cute Patterns

View all Halloween patterns →