Halloween & Spooky Cute100% Original Design

Harvest Pumpkin Owl — 1:1 Fuse Bead Pattern

Whimsical autumn owl dressed inside a tiny orange pumpkin costume with leafy green collar. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 255 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads255 pcs6 solid colors
Est. Craft Time~12 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P04Orange#F46A251031 bag1 bag
P12Brown#5A3A28941 bag1 bag
P02Cream#F1E8C9401 bag1 bag
P11Light Green#5CB86E131 bag1 bag
P03Yellow#F7D11731 bag1 bag
P18Black#1E202321 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Harvest Pumpkin Owl

1:1 Under-Board Alignment Tip

Combines Halloween and November harvest decor in one 29×29 piece that stays up from October through Thanksgiving. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Halloween & Spooky Cute Patterns

View all Halloween patterns →