Christmas & Winter Ornaments100% Original Design

Starlight Holiday Pine Tree — 1:1 Fuse Bead Pattern

Layered evergreen Christmas tree draped with golden garland beads, crimson baubles, and a glowing star topper. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 195 total beads across 5 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads195 pcs5 solid colors
Est. Craft Time~9 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P10Dark Green#146B43771 bag1 bag
P82Evergreen#1E4C37621 bag1 bag
P03Yellow#F7D117311 bag1 bag
P12Brown#5A3A28201 bag1 bag
P05Red#C8222B51 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Starlight Holiday Pine Tree

1:1 Under-Board Alignment Tip

One of our fastest classroom holiday builds—uses 6 core colors included in every Perler and Hama starter kit. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Christmas & Winter Ornaments Patterns

View all Christmas patterns →