Christmas & Winter Ornaments100% Original Design

Gingerbread Cottage — 1:1 Fuse Bead Pattern

Cozy spiced gingerbread house topped with piped white royal-icing snow, peppermint door arch, and gumdrop roof tiles. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 290 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads290 pcs6 solid colors
Est. Craft Time~13 minIntermediate

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P131Gingerbread#8E57341511 bag1 bag
P01White#F7F8F9591 bag1 bag
P12Brown#5A3A28531 bag1 bag
P05Red#C8222B211 bag1 bag
P03Yellow#F7D11741 bag1 bag
P103Shamrock#289E4A21 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Gingerbread Cottage

1:1 Under-Board Alignment Tip

Frame the roof eaves in solid White (P01) icing first, then alternate Red (P05) and Shamrock (P103) gumdrop accents. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Christmas & Winter Ornaments Patterns

View all Christmas patterns →