Christmas & Winter Ornaments100% Original Design

Top-Hat Snowman Pal — 1:1 Fuse Bead Pattern

Two-tier cheerful snowman wearing a charcoal silk hat, striped berry scarf, and carrot nose. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 241 total beads across 5 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads241 pcs5 solid colors
Est. Craft Time~11 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P01White#F7F8F91261 bag1 bag
P18Black#1E2023911 bag1 bag
P05Red#C8222B181 bag1 bag
P04Orange#F46A2541 bag1 bag
P10Dark Green#146B4321 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Top-Hat Snowman Pal

1:1 Under-Board Alignment Tip

Starter-bucket ready: uses classic White, Black, Orange, Red, and Green shades with zero rare specialty colors. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Contains asymmetrical or readable details: enable Mirror Horizontally before exporting your 1:1 PDF if you flat-melt the back using the masking-tape method. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Christmas & Winter Ornaments Patterns

View all Christmas patterns →