Christmas & Winter Ornaments100% Original Design

Holly Berry Door Wreath — 1:1 Fuse Bead Pattern

Classic evergreen holiday ring wreath tied with a bold crimson ribbon bow and clustered red holly berries. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 266 total beads across 5 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads266 pcs5 solid colors
Est. Craft Time~12 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P10Dark Green#146B431091 bag1 bag
P82Evergreen#1E4C37841 bag1 bag
P05Red#C8222B391 bag1 bag
P11Light Green#5CB86E291 bag1 bag
P03Yellow#F7D11751 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Holly Berry Door Wreath

1:1 Under-Board Alignment Tip

Thread twine straight through the natural center wreath opening or leave one top peg empty above the evergreen crown. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Christmas & Winter Ornaments Patterns

View all Christmas patterns →