Christmas & Winter Ornaments100% Original Design

Red-Nose Reindeer Charm — 1:1 Fuse Bead Pattern

Cheerful winter reindeer portrait with branched caramel antlers, bright crimson nose, and holly collar. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 174 total beads across 7 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads174 pcs7 solid colors
Est. Craft Time~8 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P12Brown#5A3A28601 bag1 bag
P21Light Brown#8F603E561 bag1 bag
P35Tan#C49A6C341 bag1 bag
P05Red#C8222B101 bag1 bag
P10Dark Green#146B43101 bag1 bag
P01White#F7F8F921 bag1 bag
P18Black#1E202321 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Red-Nose Reindeer Charm

1:1 Under-Board Alignment Tip

Connect the inner antler tines down into the top head border so antlers stay rigid when removed with painter’s tape. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Christmas & Winter Ornaments Patterns

View all Christmas patterns →