Christmas & Winter Ornaments100% Original Design

Nutcracker Guard Badge — 1:1 Fuse Bead Pattern

Classic wooden toy soldier portrait with tall shako hat, gold epaulets, and white mustache on a 29×29 grid. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 255 total beads across 5 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads255 pcs5 solid colors
Est. Craft Time~12 minIntermediate

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P18Black#1E20231421 bag1 bag
P05Red#C8222B631 bag1 bag
P33Peach#F6C2A3241 bag1 bag
P03Yellow#F7D117191 bag1 bag
P01White#F7F8F971 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Nutcracker Guard Badge

1:1 Under-Board Alignment Tip

Place the symmetric mustache at row 16 around center column 14 so the shako visor and jacket buttons align straight. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Christmas & Winter Ornaments Patterns

View all Christmas patterns →