Animals & Cute Pets100% Original Design

Emerald Sea Turtle — 1:1 Fuse Bead Pattern

Top-down ocean sea turtle featuring a hexagonal emerald-and-kiwi shell mosaic and curved flippers on one 29×29 board. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 247 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads247 pcs6 solid colors
Est. Craft Time~11 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P10Dark Green#146B43931 bag1 bag
P61Kiwi Lime#78BF34881 bag1 bag
P11Light Green#5CB86E471 bag1 bag
P58Toothpaste#9DE2D0151 bag1 bag
P18Black#1E202321 bag1 bag
P01White#F7F8F921 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Emerald Sea Turtle

1:1 Under-Board Alignment Tip

Alternate Dark Green (P10) and Kiwi Lime (P61) scutes inside the shell ring so each hexagonal plate stands out after ironing. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Animals & Cute Pets Patterns

View all Animals patterns →