Animals & Cute Pets100% Original Design

Bamboo Red Panda — 1:1 Fuse Bead Pattern

Adorable rust-orange red panda with cream eyebrow teardrops, striped tail, and a fresh green bamboo stalk. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 299 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads299 pcs6 solid colors
Est. Craft Time~14 minIntermediate

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P12Brown#5A3A281171 bag1 bag
P20Rust#943F281131 bag1 bag
P02Cream#F1E8C9441 bag1 bag
P11Light Green#5CB86E141 bag1 bag
P57Cheddar#F6AE2D81 bag1 bag
P18Black#1E202331 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Bamboo Red Panda

1:1 Under-Board Alignment Tip

Alternate Rust (P20) and Cheddar (P57) rings along the curved tail to capture the signature striped red panda silhouette. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Contains asymmetrical or readable details: enable Mirror Horizontally before exporting your 1:1 PDF if you flat-melt the back using the masking-tape method. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Animals & Cute Pets Patterns

View all Animals patterns →