Animals & Cute Pets100% Original Design

Yuzu Bath Capybara — 1:1 Fuse Bead Pattern

Chill brown capybara soaking peacefully with a tiny golden yuzu citrus balanced on top of its head. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 280 total beads across 7 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads280 pcs7 solid colors
Est. Craft Time~13 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P12Brown#5A3A28941 bag1 bag
P21Light Brown#8F603E701 bag1 bag
P52Pastel Blue#71AEDF531 bag1 bag
P35Tan#C49A6C491 bag1 bag
P18Black#1E202371 bag1 bag
P03Yellow#F7D11751 bag1 bag
P11Light Green#5CB86E21 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Yuzu Bath Capybara

1:1 Under-Board Alignment Tip

Top the yuzu fruit at (14, 4) with two Light Green (P11) leaf beads to frame the capybara silhouette cleanly. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Animals & Cute Pets Patterns

View all Animals patterns →