Animals & Cute Pets100% Original Design

Clover Meadow Bunny — 1:1 Fuse Bead Pattern

Floppy-eared white spring rabbit holding a crisp emerald clover leaf with pastel pink inner ears. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 249 total beads across 5 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads249 pcs5 solid colors
Est. Craft Time~11 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P01White#F7F8F91421 bag1 bag
P18Black#1E2023791 bag1 bag
P63Blush#F39CB2131 bag1 bag
P10Dark Green#146B43101 bag1 bag
P11Light Green#5CB86E51 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Clover Meadow Bunny

1:1 Under-Board Alignment Tip

Starter-jar friendly: uses only White, Black, Blush, Light Green, and Dark Green—ideal for quick 12-minute craft sessions. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Animals & Cute Pets Patterns

View all Animals patterns →