Animals & Cute Pets100% Original Design

Lilypad Tree Frog — 1:1 Fuse Bead Pattern

Bright kiwi-green tree frog with big golden-rimmed eyes sitting atop a turquoise pond ripple. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 302 total beads across 7 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads302 pcs7 solid colors
Est. Craft Time~14 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P10Dark Green#146B431121 bag1 bag
P61Kiwi Lime#78BF34651 bag1 bag
P02Cream#F1E8C9521 bag1 bag
P62Turquoise#0090B2471 bag1 bag
P03Yellow#F7D117221 bag1 bag
P18Black#1E202321 bag1 bag
P63Blush#F39CB221 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Lilypad Tree Frog

1:1 Under-Board Alignment Tip

Place both protruding eye domes at rows 6–10 first so the wide smile lines up cleanly across column 14. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Animals & Cute Pets Patterns

View all Animals patterns →