Animals & Cute Pets100% Original Design

Smiling Pembroke Corgi — 1:1 Fuse Bead Pattern

Happy golden-tan corgi puppy with oversized upright ears, white chest blaze, and tongue-out grin for a 29×29 pegboard. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 310 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads310 pcs6 solid colors
Est. Craft Time~14 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P18Black#1E20231001 bag1 bag
P57Cheddar#F6AE2D941 bag1 bag
P01White#F7F8F9861 bag1 bag
P35Tan#C49A6C241 bag1 bag
P63Blush#F39CB241 bag1 bag
P05Red#C8222B21 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Smiling Pembroke Corgi

1:1 Under-Board Alignment Tip

Keep the central white blaze symmetrical from forehead row 9 down to chest row 23 so the corgi markings read crisply. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Animals & Cute Pets Patterns

View all Animals patterns →