Space, Cosmic & Original 8-Bit Arcade100% Original Design

Flying Saucer Tractor Beam — 1:1 Fuse Bead Pattern

Chrome-grey flying saucer with turquoise glass dome projecting a neon-lime tractor beam cone. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 228 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads228 pcs6 solid colors
Est. Craft Time~10 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P49Neon Green#4EE04D1011 bag1 bag
P18Black#1E2023571 bag1 bag
P81Light Grey#BDC2C8441 bag1 bag
P62Turquoise#0090B2201 bag1 bag
P03Yellow#F7D11751 bag1 bag
P01White#F7F8F911 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Flying Saucer Tractor Beam

1:1 Under-Board Alignment Tip

Swap Neon Green (P49) in the tractor beam for Glow Green (P75) to make the beam glow in dark bedrooms. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Space, Cosmic & Original 8-Bit Arcade Patterns

View all Space & 8-Bit patterns →