Space, Cosmic & Original 8-Bit Arcade100% Original Design

Spiral Nebula Disc — 1:1 Fuse Bead Pattern

Swirling violet, magenta, cobalt, and white cosmic galaxy coaster for sci-fi desks. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 377 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads377 pcs6 solid colors
Est. Craft Time~17 minIntermediate

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P105Midnight#1B25421481 bag1 bag
P07Purple#63428F1021 bag1 bag
P38Magenta#D82E6F741 bag1 bag
P03Yellow#F7D117261 bag1 bag
P62Turquoise#0090B2211 bag1 bag
P01White#F7F8F961 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Spiral Nebula Disc

1:1 Under-Board Alignment Tip

Start from the glowing White/Yellow galactic core at (14, 14) and spiral outward in Magenta and Cobalt. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Space, Cosmic & Original 8-Bit Arcade Patterns

View all Space & 8-Bit patterns →