Space, Cosmic & Original 8-Bit Arcade100% Original Design

Lunar Explorer Rocket — 1:1 Fuse Bead Pattern

Classic red-and-white tail-fin moon rocket blasting off over an orange-and-yellow exhaust plume. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 203 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads203 pcs6 solid colors
Est. Craft Time~9 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P18Black#1E2023941 bag1 bag
P01White#F7F8F9421 bag1 bag
P05Red#C8222B281 bag1 bag
P04Orange#F46A25181 bag1 bag
P03Yellow#F7D117121 bag1 bag
P09Light Blue#2D85C591 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Lunar Explorer Rocket

1:1 Under-Board Alignment Tip

Starter-bucket friendly using White, Red, Dark Blue, Orange, Yellow, and Black. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Space, Cosmic & Original 8-Bit Arcade Patterns

View all Space & 8-Bit patterns →