Space, Cosmic & Original 8-Bit Arcade100% Original Design

Orbital Solar Station (2×2) — 1:1 Fuse Bead Pattern

Detailed 2×2 (58×58 beads, 290×290mm) orbital research station with cobalt solar wing arrays suspended above Earth’s limb. Sized at 58×58 pegs (290.0×290.0 mm at 5.00mm pitch, 2334 total beads across 8 colors).

Finished 1:1 Size290.0×290.0 mm11.42×11.42 in
Pegboards2×2 Board29×29 (5.00mm)
Total Beads2,334 pcs8 solid colors
Est. Craft Time~106 minAdvanced

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P105Midnight#1B25427982 bags1 bag
P62Turquoise#0090B26392 bags1 bag
P57Cheddar#F6AE2D2251 bag1 bag
P08Dark Blue#1B3A7A2161 bag1 bag
P18Black#1E20231481 bag1 bag
P11Light Green#5CB86E1411 bag1 bag
P81Light Grey#BDC2C8961 bag1 bag
P01White#F7F8F9711 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Orbital Solar Station (2×2)

1:1 Under-Board Alignment Tip

Bridge both solar wing trusses with 3-bead silver beams so the 58-bead span lifts cleanly in one tape sheet. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Space, Cosmic & Original 8-Bit Arcade Patterns

View all Space & 8-Bit patterns →