Space, Cosmic & Original 8-Bit Arcade100% Original Design

Friendly Tin Desk Robot — 1:1 Fuse Bead Pattern

Original boxy retro robot with antenna bulb, glowing turquoise LED eyes, and chest heart meter. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 270 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads270 pcs6 solid colors
Est. Craft Time~12 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P81Light Grey#BDC2C8981 bag1 bag
P18Black#1E2023881 bag1 bag
P17Grey#8C9197591 bag1 bag
P05Red#C8222B141 bag1 bag
P03Yellow#F7D11771 bag1 bag
P62Turquoise#0090B241 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Friendly Tin Desk Robot

1:1 Under-Board Alignment Tip

Ideal STEM club or robotics-camp workshop badge—uses crisp rectangular geometry that beginners count fast. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Space, Cosmic & Original 8-Bit Arcade Patterns

View all Space & 8-Bit patterns →