Keychains, Backpack Tags & Charms100% Original Design

Shooting Star Backpack Badge — 1:1 Fuse Bead Pattern

Five-point golden star badge framed on a dark-blue shield with pastel cyan comet trails. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 284 total beads across 5 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads284 pcs5 solid colors
Est. Craft Time~13 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P08Dark Blue#1B3A7A2111 bag1 bag
P03Yellow#F7D117411 bag1 bag
P56Pastel Yellow#F7E97F201 bag1 bag
P101Robins Egg#6AC4D861 bag1 bag
P01White#F7F8F961 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Shooting Star Backpack Badge

1:1 Under-Board Alignment Tip

Solid navy shield backing prevents star tips from catching on backpack mesh pockets. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Keychains, Backpack Tags & Charms Patterns

View all Keychains patterns →