Keychains, Backpack Tags & Charms100% Original Design

Sunny Shiba Keychain — 1:1 Fuse Bead Pattern

Reinforced navy name tag stamped with SHIBA block letters, golden star accent, and a built-in top jump-ring hole. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 230 total beads across 3 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads230 pcs3 solid colors
Est. Craft Time~10 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P08Dark Blue#1B3A7A1821 bag1 bag
P01White#F7F8F9471 bag1 bag
P57Cheddar#F6AE2D11 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Sunny Shiba Keychain

1:1 Under-Board Alignment Tip

Leave the reserved top hole unfused and enable Mirror Horizontally so SHIBA reads right-side up on the flat-melted face. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Contains asymmetrical or readable details: enable Mirror Horizontally before exporting your 1:1 PDF if you flat-melt the back using the masking-tape method. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Keychains, Backpack Tags & Charms Patterns

View all Keychains patterns →