Keychains, Backpack Tags & Charms100% Original Design

Lucky Four-Leaf Clover Fob — 1:1 Fuse Bead Pattern

Emerald and shamrock-green four-leaf clover pocket charm with a golden heart center and jump-ring eyelet. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 232 total beads across 4 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads232 pcs4 solid colors
Est. Craft Time~11 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P82Evergreen#1E4C371031 bag1 bag
P10Dark Green#146B43581 bag1 bag
P11Light Green#5CB86E581 bag1 bag
P03Yellow#F7D117131 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Lucky Four-Leaf Clover Fob

1:1 Under-Board Alignment Tip

Fast 140-bead charm that uses leftover greens from any starter jar; iron both sides lightly for extra pocket durability. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Keychains, Backpack Tags & Charms Patterns

View all Keychains patterns →