Keychains, Backpack Tags & Charms100% Original Design

Street Skateboard Deck Tag — 1:1 Fuse Bead Pattern

Vertical skateboard deck charm featuring flame-orange stripes, turquoise wheels, and a nose jump-ring hole. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 156 total beads across 5 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads156 pcs5 solid colors
Est. Craft Time~7 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P08Dark Blue#1B3A7A901 bag1 bag
P18Black#1E2023441 bag1 bag
P62Turquoise#0090B281 bag1 bag
P04Orange#F46A2571 bag1 bag
P03Yellow#F7D11771 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Street Skateboard Deck Tag

1:1 Under-Board Alignment Tip

Connect all four turquoise wheels directly into the deck rails so wheels never snag inside jacket pockets. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Keychains, Backpack Tags & Charms Patterns

View all Keychains patterns →