Keychains, Backpack Tags & Charms100% Original Design

Pet Paw-Print Collar Tag — 1:1 Fuse Bead Pattern

Round turquoise pet-bag tag embossed with a crisp cream-and-cocoa paw pad and top keyring hole. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 284 total beads across 4 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads284 pcs4 solid colors
Est. Craft Time~13 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P62Turquoise#0090B21421 bag1 bag
P18Black#1E2023631 bag1 bag
P12Brown#5A3A28521 bag1 bag
P01White#F7F8F9271 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Pet Paw-Print Collar Tag

1:1 Under-Board Alignment Tip

Stamp your pet’s 3-letter nickname below the paw inside Studio for personalized dog-walker Tote tags. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Keychains, Backpack Tags & Charms Patterns

View all Keychains patterns →