Easy Beginners (Single 29×29 Board)100% Original Design

Potted Spring Tulip — 1:1 Fuse Bead Pattern

Bright red three-petal tulip standing in a warm rust-brown terracotta pot with symmetric green leaves. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 229 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads229 pcs6 solid colors
Est. Craft Time~10 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P18Black#1E2023641 bag1 bag
P05Red#C8222B471 bag1 bag
P20Rust#943F28471 bag1 bag
P10Dark Green#146B43371 bag1 bag
P06Bubblegum#E46A94241 bag1 bag
P11Light Green#5CB86E101 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Potted Spring Tulip

1:1 Under-Board Alignment Tip

Make the green stem 3 columns wide (13..15) so the flower head and pot fuse into a sturdy single piece. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Easy Beginners (Single 29×29 Board) Patterns

View all Easy Beginners patterns →