Easy Beginners (Single 29×29 Board)100% Original Design

Pepperoni Pizza Slice — 1:1 Fuse Bead Pattern

Cheesy yellow pizza triangle with toasted tan crust and bold crimson pepperoni rounds. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 274 total beads across 5 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads274 pcs5 solid colors
Est. Craft Time~12 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P03Yellow#F7D1171191 bag1 bag
P12Brown#5A3A28701 bag1 bag
P05Red#C8222B361 bag1 bag
P35Tan#C49A6C341 bag1 bag
P57Cheddar#F6AE2D151 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Pepperoni Pizza Slice

1:1 Under-Board Alignment Tip

Start with the curved tan crust across rows 5–8 and step inward one column every two rows down to row 24. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Easy Beginners (Single 29×29 Board) Patterns

View all Easy Beginners patterns →