Kawaii Food, Drinks & Coasters100% Original Design

Strawberry Milk Boba — 1:1 Fuse Bead Pattern

5-color starter-bucket-friendly kawaii bubble tea cup with brown tapioca pearls, tilted straw, and berry heart. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 178 total beads across 5 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads178 pcs5 solid colors
Est. Craft Time~8 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P12Brown#5A3A28751 bag1 bag
P06Bubblegum#E46A94401 bag1 bag
P63Blush#F39CB2391 bag1 bag
P05Red#C8222B221 bag1 bag
P01White#F7F8F921 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Strawberry Milk Boba

1:1 Under-Board Alignment Tip

100% compatible with the Perler 11,000 Activity Jar using Brown, White, Blush, Bubblegum, and Red. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Kawaii Food, Drinks & Coasters Patterns

View all Food & Drinks patterns →