Kawaii Food, Drinks & Coasters100% Original Design

Matcha Cream Swiss Roll — 1:1 Fuse Bead Pattern

Japanese green-tea sponge cake roll with a cream spiral center and a ripe red strawberry crown. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 196 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads196 pcs6 solid colors
Est. Craft Time~9 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P12Brown#5A3A28511 bag1 bag
P02Cream#F1E8C9481 bag1 bag
P11Light Green#5CB86E451 bag1 bag
P53Pastel Green#86D0A3361 bag1 bag
P01White#F7F8F991 bag1 bag
P05Red#C8222B71 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Matcha Cream Swiss Roll

1:1 Under-Board Alignment Tip

Trace the spiral cream swirl carefully inside the front slice so the cake roll geometry stays unmistakable. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Kawaii Food, Drinks & Coasters Patterns

View all Food & Drinks patterns →