Kawaii Food, Drinks & Coasters100% Original Design

Smiling Crunchy Taco — 1:1 Fuse Bead Pattern

Golden corn taco shell stuffed with crisp lettuce, diced red tomatoes, and cheddar cheese shreds. Sized at 29×29 pegs (145.0×145.0 mm at 5.00mm pitch, 255 total beads across 6 colors).

Finished 1:1 Size145.0×145.0 mm5.71×5.71 in
Pegboards1×1 Board29×29 (5.00mm)
Total Beads255 pcs6 solid colors
Est. Craft Time~12 minBeginner

High-melt HDPE; compatible with Artkal S 5.0mm. Avoid mixing with lower-melt Hama or stiffer IKEA Pyssla on the same board.

Bead Color Key & 500 / 1,000 Bag Shopping List (Perler Midi (5.0mm))

Open 6-Brand Color Converter →
Digital RingCodeShade NameHEXBeads Needed500-pc Bags1,000-pc Bags
P57Cheddar#F6AE2D1211 bag1 bag
P12Brown#5A3A28791 bag1 bag
P11Light Green#5CB86E471 bag1 bag
P18Black#1E202351 bag1 bag
P05Red#C8222B21 bag1 bag
P03Yellow#F7D11711 bag1 bag

Pegboard Placement & Flat-Melt Ironing Notes for Smiling Crunchy Taco

1:1 Under-Board Alignment Tip

Starter-bucket friendly using Cheddar/Yellow, Green, Red, Brown, and Black. Always print at Actual Size / 100% and confirm the bottom 50.0mm ruler equals 10 Midi pegs (see our 1:1 Print Calibration Guide).

Masking Tape & Ironing Tip

Lift off the pegboard with Overlapping painter’s tape, poke ventilation holes in every bead center, and fuse evenly through parchment paper at medium heat. Read our Masking Tape Flat-Melt Guide and Brand Melting Point Chart before mixing brands.

More Kawaii Food, Drinks & Coasters Patterns

View all Food & Drinks patterns →